Change and clean customer provided air filter as needed
What Is a Customer Provided Air Filter?
A customer provided filter is any filter on the system that was put there by a customer themselves. This can be a filter located inside the system or inside the outdoor unit. In either case the end result is the same. The customer provided filter is a clean filter where dust and dirt collected over time in the air coming out of their house. It is critical to have this system cleaned out on a regular basis. If you have an air conditioning or heating system then there is a good chance you have a customer provided filter somewhere in your system. Changing this filter is necessary to ensure the quality of the air coming into the home or office. It is also useful for HVAC technicians to know how to clean it as needed.
How Often Should You Change The Customer Provided Air Filter?
It’s best to change the customer provided filter every two weeks. If you change it one week, then change it back the next week you may go too long without changing it. It’s very important that the filter is clean and not broken. Sometimes the filter is just dirty enough so that it breaks when you try to remove it. It’s also important to not put too much stress on the filter when you change it. Some of the most common mistakes made when changing customer provided filters is too much pressure when removing the old filter and not enough when installing the new one. View this great information.
Tools Needed For A New Air Filter Replacement
Air Filter Replacement Air Filter Installation Tool – Pick This Up At Your Local Hardware Store Air Conditioner or Heater Air Filter Replacement Tool – Pick This Up At Your Local Hardware Store – Air compressor – Pick this up at your local hardware store. – Air hose – Pick this up at your local hardware store. – New air filter – Pick this up at your local hardware store. – Screw driver – Pick this up at your local hardware store. – Pliers – Pick this up at your local hardware store. – Socket extension – Pick this up at your local hardware store. – Pipe wrench – Pick this up at your local hardware store.
How To Remove A Dirty Air Filter
Now that we have a new air filter ready to go in we need to get the dirty one out. This can be a little tricky and even dangerous if you don’t know what you are doing. If you are not careful you could break the filter and have to start all over again. It’s very important to know how to safely remove a dirty air filter. Be careful and wear safety glasses when doing this. The filter is filled with dust and dirt so you could end up getting dust in your eyes. Be extra careful when working around the side of the indoor unit if your system is in a garage or if you are replacing a filter on a rooftop system. Be sure to remove any objects that might get in your way if you are working underneath a unit. View this article.
How To Install A New Air Filter
Now that the dirty air filter is out, let’s put in the new filter. This can be a little tricky as there are no guidelines on how large the new filter needs to be. One thing you can do is measure the length and width of the old filter and use that as a guide. It’s best to have someone help you hold the new filter in place while you screw the new one in. If you have a real challenge getting the new filter to lock in place you may need to use a wrench to help get it tight. It’s best to err on the side of caution and make sure the filter is securely locked in place.
Conclusion
Changing and cleaning customer provided air filters as needed is important for HVAC technicians to be successful. Knowing how to do this is critical for HVAC technicians. There are many different types of customer provided filters and knowing how to clean each one will come in handy. Make sure to keep your system free of dust and dirt to prolong the life of your system and your filters. Be sure to change your customer provided filter as needed to ensure the best possible air quality in your home or office.